Soporte de pared AC 7500 SM
Soporte de pared para altavoces compactos en formato clásico de gabinete de madera y dipolos.
29,99 €
Lo más destacado
Todas las ventajas de un vistazo
- Home cinema set with partially-active floor speakers for large spaces
- 2 integrated subwoofers (175 watt RMS each) with 250 mm bass drivers
- 1 horizontal center speaker with dual mid-range drivers
- 2 identically-configured rear loudspeakers
- Works with any AV Receiver
- Recommended for spaces up to 50 sqm.
Datos técnicos
Centre Speaker M 420 C
The centre that integrates seamlessly with the active floorstanders M 420 F.
Two 2 x 130-mm carbon fibre woofers with metal phase plug and a 25-mm neodymium dome tweeter make this speaker assembly identical to large front box - of course minus the unnecessary subwoofer in the centre field.
The THX standard and landscape format design ensures excellent sound dispersion, so that you get great Teufel sound even outside of the perfect listening zone.
Thanks to a high maximum power rating of 180Watts, the centre can also be used in rooms up to 50 sqm.
-
Descripción Ítem Anchura 42 cm Altura 16 cm Profundidad 17 cm Peso 5,5 kg -
Descripción Ítem Apropiado para receptor AV si Apto para clavija banana si Diámetro máximo del cable. 4 mm Tapa frontal desmontable si Blindaje electrostático si Soporte de pared si Tweeters (número por altavoz) 1 Tweeter (diámetro) 25 mm Medio grave (número por altavoz) 2 Medio grave (diámetro) 130 mm Potencia continua en vatios (IEC - Larga duración) 130 W Rango de frecuencia de/a 80 - 22000 Hz Respuesta de impulso (Ruido IEC de corta duración) 180 W Impedancia nominal 4 - 8 Ohm Frecuencia de corte al woofer (recomendada). 90 Hz
Pair Rear Speaker M 420 R
Rear channel duties in the new Theater 4 system are handled by the M 420 R, a classic bookshelf speaker.
By using the same drivers as the three front speakers – 130 mm fibreglass woofer and 25 mm fabric dome tweeter – the surround sound of this system is highly balanced.
With a maximum power rating of 90 W, this speaker has sufficient reserves to handle loud signals on the rear channels.
-
Descripción Ítem Anchura 16,5 cm Altura 26 cm Profundidad 19 cm Peso 3,5 kg -
Descripción Ítem Bornes de conexión Terminales de tornillo -
Descripción Ítem Apropiado para receptor AV si Apto para clavija banana si Diámetro máximo del cable. 4 mm Tapa frontal desmontable si Blindaje electrostático si Tweeters (número por altavoz) 1 Tweeter (diámetro) 25 mm Tweeter (material) Textile dome with Neodymium magnet Medio grave (número por altavoz) 1 Medio grave (diámetro) 130 mm Madio grave (material) Fibra de vidrio Potencia continua en vatios (IEC - Larga duración) 70 W Respuesta de impulso (Ruido IEC de corta duración) 90 W Impedancia nominal 8 Ohm Diseño de la carcasa cerrada
Hybrid Speaker M 420 F
The M 420 F column speaker is much more than a conventional column speaker. The special hybrid construction of this speaker allows it to simultaneously function as a passive stereo speaker and an active subwoofer.
Two 130 mm carbon fibre woofers and a 25 mm neodymium tweeter have been implemented in each speaker using the tried-and-tested D’Appollito configuration. Flanked by a 250 mm side-firing subwoofer, the M 420 F has a full-bodied response with incredible bass – and all in an ultra thin design!
The remarkable bass performance of this speaker is made possible by a separate 175 W amplifier which is solely responsible for the subwoofer channel. The tweeter/mid-range driver is located above, and is passively decoupled to handle frequencies from 90 Hz upwards. This driver can easily be seen from the front and is acoustically isolated within the column.
The universal design of the integrated active subwoofer allows it to be connected to the ‘Sub Out’ of your AV receiver or the speaker terminals of your stereo amplifier. In any case, this relieves your amplifier/receiver from bass duties and frees it up to concentrate more on the other frequency ranges.
With a pair of M 420 F speakers, you will dramatically improve the quality of the bass response in your stereo system. When used in a surround sound system, these two column speakers essentially add two subwoofers to your system.
A three-stage volume selector switch allows you to select how much bass is split between the subwoofer and tweeter/mid-range drivers and thus match the system to your listening environment.
This active/passive design delivers bass all the way down to 35 Hz and can generate sound pressure levels as high as 103 dB/m!
-
Descripción Ítem Anchura 16,5 cm Altura 110 cm Profundidad 36 cm Peso 23,6 kg -
Descripción Ítem Función de ahorro de energía si Consumo en modo de reposo 2 W Regulador de nivel Analogue Potencia de salida Canal de subwoofer "sinusoidal" 175 W -
Descripción Ítem Frecuencia de corte inferior (-3 dB). 25 Hz Apropiado para receptor AV si Apto para clavija banana si Diámetro máximo del cable. 4 mm Tapa frontal desmontable si Blindaje electrostático si Tweeters (número por altavoz) 1 Tweeter (diámetro) 25 mm Tweeter (material) Tejido Medio grave (número por altavoz) 2 Medio grave (diámetro) 130 mm Madio grave (material) Fibra de vidrio Woofers (número por altavoz) 1 Woofer (diámetro) 250 mm Potencia continua en vatios (IEC - Larga duración) 130 W Rango de frecuencia de/a 34 - 22000 Hz Respuesta de impulso (Ruido IEC de corta duración) 180 W Nivel máximo de presión sonora 103 dB/1m Impedancia nominal 4 - 8 Ohm Frecuencia de corte al woofer (recomendada). 90 Hz Principio de acústica Sistema de 2 vías Diseño de la carcasa cerrada -
Descripción Ítem Bornes de conexión Terminales de tornillo Potencia mínima recomendada del amplificador 20 W
Hybrid Speaker M 420 F
The M 420 F column speaker is much more than a conventional column speaker. The special hybrid construction of this speaker allows it to simultaneously function as a passive stereo speaker and an active subwoofer.
Two 130 mm carbon fibre woofers and a 25 mm neodymium tweeter have been implemented in each speaker using the tried-and-tested D’Appollito configuration. Flanked by a 250 mm side-firing subwoofer, the M 420 F has a full-bodied response with incredible bass – and all in an ultra thin design!
The remarkable bass performance of this speaker is made possible by a separate 175 W amplifier which is solely responsible for the subwoofer channel. The tweeter/mid-range driver is located above, and is passively decoupled to handle frequencies from 90 Hz upwards. This driver can easily be seen from the front and is acoustically isolated within the column.
The universal design of the integrated active subwoofer allows it to be connected to the ‘Sub Out’ of your AV receiver or the speaker terminals of your stereo amplifier. In any case, this relieves your amplifier/receiver from bass duties and frees it up to concentrate more on the other frequency ranges.
With a pair of M 420 F speakers, you will dramatically improve the quality of the bass response in your stereo system. When used in a surround sound system, these two column speakers essentially add two subwoofers to your system.
A three-stage volume selector switch allows you to select how much bass is split between the subwoofer and tweeter/mid-range drivers and thus match the system to your listening environment.
This active/passive design delivers bass all the way down to 35 Hz and can generate sound pressure levels as high as 103 dB/m!
-
Descripción Ítem Anchura 16,5 cm Altura 110 cm Profundidad 36 cm Peso 23,6 kg -
Descripción Ítem Función de ahorro de energía si Consumo en modo de reposo 2 W Regulador de nivel Analogue -
Descripción Ítem Frecuencia de corte inferior (-3 dB). 25 Hz Apto para clavija banana si Tapa frontal desmontable si Blindaje electrostático si Tweeters (número por altavoz) 1 Tweeter (diámetro) 25 mm Tweeter (material) Textile dome with Neodymium magnet Medio grave (número por altavoz) 2 Medio grave (diámetro) 130 mm Madio grave (material) Fibra de vidrio Woofers (número por altavoz) 1 Woofer (diámetro) 250 mm Potencia continua en vatios (IEC - Larga duración) 130 W Rango de frecuencia de/a 34 - 22000 Hz Respuesta de impulso (Ruido IEC de corta duración) 180 W Nivel máximo de presión sonora 103 dB/1m Impedancia nominal 4 - 8 Ohm Frecuencia de corte al woofer (recomendada). 90 Hz Diseño de la carcasa cerrada -
Descripción Ítem Bornes de conexión Terminales de tornillo Potencia mínima recomendada del amplificador 20 W
Componentes incluidos
Theater 4 Hybrid "5.2-Set"
- 1 × Center-Lautsprecher M 420 C – Haya
-
1 × Paar Rear-Lautsprecher M 420 R
–
Haya
- 2 × Rear-Lautsprecher M 420 R (Stk.) – Haya
- 1 × Hybrid-Lautsprecher M 420 F (Rechts) – Haya
- 1 × Hybrid-Lautsprecher M 420 F (Links) – Haya