Página de inicio

Ir al contenido
Página principal

M 420 F Stereo Set

Stereo speaker with integrated active subwoofer

Color: Haya

Lo más destacado

M 420 F Stereo Set - Buche

Todas las ventajas de un vistazo

  • Floor standing loudspeakers with integrated active subwoofers
  • 2 x 175 watt amplifier operating 250 mm side-mounted bass drivers
  • 3-way D'Appolito construction: 2 x 130 mm mid-range driver, 25 mm tweeter
  • Works with any AV receiver or stereo amplifier
  • Adjustable bass can be increased or decreased
  • Recommended for spaces up to 35 sqm.
The two active/passive M 420 F column speakers with integrated subwoofer are capable of producing an incredibly powerful yet finely differentiated sound. The integrated 175 watt amplifier powers the laterally positioned 250 mm subwoofers and can be connected directly to the speaker output of a stereo amplifier. The set is only available in pairs and the price refers to a pair.
Muéstrame más

Datos técnicos

M 420 F links Buche

Hybrid Speaker M 420 F

The M 420 F column speaker is much more than a conventional column speaker. The special hybrid construction of this speaker allows it to simultaneously function as a passive stereo speaker and an active subwoofer.

Two 130 mm carbon fibre woofers and a 25 mm neodymium tweeter have been implemented in each speaker using the tried-and-tested D’Appollito configuration. Flanked by a 250 mm side-firing subwoofer, the M 420 F has a full-bodied response with incredible bass – and all in an ultra thin design!

The remarkable bass performance of this speaker is made possible by a separate 175 W amplifier which is solely responsible for the subwoofer channel. The tweeter/mid-range driver is located above, and is passively decoupled to handle frequencies from 90 Hz upwards. This driver can easily be seen from the front and is acoustically isolated within the column.

The universal design of the integrated active subwoofer allows it to be connected to the ‘Sub Out’ of your AV receiver or the speaker terminals of your stereo amplifier. In any case, this relieves your amplifier/receiver from bass duties and frees it up to concentrate more on the other frequency ranges.

With a pair of M 420 F speakers, you will dramatically improve the quality of the bass response in your stereo system. When used in a surround sound system, these two column speakers essentially add two subwoofers to your system.

A three-stage volume selector switch allows you to select how much bass is split between the subwoofer and tweeter/mid-range drivers and thus match the system to your listening environment.

This active/passive design delivers bass all the way down to 35 Hz and can generate sound pressure levels as high as 103 dB/m!

  • Descripción Ítem
    Anchura 16,5 cm
    Altura 110 cm
    Profundidad 36 cm
    Peso 23,6 kg
  • Descripción Ítem
    Función de ahorro de energía si
    Consumo en modo de reposo 2 W
    Regulador de nivel Analogue
  • Descripción Ítem
    Frecuencia de corte inferior (-3 dB). 25 Hz
    Apto para clavija banana si
    Tapa frontal desmontable si
    Blindaje electrostático si
    Tweeters (número por altavoz) 1
    Tweeter (diámetro) 25 mm
    Tweeter (material) Textile dome with Neodym magnet
    Medio grave (número por altavoz) 2
    Medio grave (diámetro) 130 mm
    Transductor de graves-medios (material) Fibra de vidrio
    Woofers (número por altavoz) 1
    Woofer (diámetro) 250 mm
    Potencia continua en vatios (IEC - Larga duración) 130 W
    Rango de frecuencia de/a 34 - 22000 Hz
    Respuesta de impulso (Ruido IEC de corta duración) 180 W
    Nivel máximo de presión sonora 103 dB/1m
    Impedancia nominal 4 - 8 Ohm
    Frecuencia de corte al woofer (recomendada). 90 Hz
    Diseño de la carcasa cerrada
  • Descripción Ítem
    Bornes de conexión Terminales de tornillo
    Potencia mínima recomendada del amplificador 20 W
M 420 F vorne Buche

Hybrid Speaker M 420 F

The M 420 F column speaker is much more than a conventional column speaker. The special hybrid construction of this speaker allows it to simultaneously function as a passive stereo speaker and an active subwoofer.

Two 130 mm carbon fibre woofers and a 25 mm neodymium tweeter have been implemented in each speaker using the tried-and-tested D’Appollito configuration. Flanked by a 250 mm side-firing subwoofer, the M 420 F has a full-bodied response with incredible bass – and all in an ultra thin design!

The remarkable bass performance of this speaker is made possible by a separate 175 W amplifier which is solely responsible for the subwoofer channel. The tweeter/mid-range driver is located above, and is passively decoupled to handle frequencies from 90 Hz upwards. This driver can easily be seen from the front and is acoustically isolated within the column.

The universal design of the integrated active subwoofer allows it to be connected to the ‘Sub Out’ of your AV receiver or the speaker terminals of your stereo amplifier. In any case, this relieves your amplifier/receiver from bass duties and frees it up to concentrate more on the other frequency ranges.

With a pair of M 420 F speakers, you will dramatically improve the quality of the bass response in your stereo system. When used in a surround sound system, these two column speakers essentially add two subwoofers to your system.

A three-stage volume selector switch allows you to select how much bass is split between the subwoofer and tweeter/mid-range drivers and thus match the system to your listening environment.

This active/passive design delivers bass all the way down to 35 Hz and can generate sound pressure levels as high as 103 dB/m!

  • Descripción Ítem
    Anchura 16,5 cm
    Altura 110 cm
    Profundidad 36 cm
    Peso 23,6 kg
  • Descripción Ítem
    Función de ahorro de energía si
    Consumo en modo de reposo 2 W
    Regulador de nivel Analogue
    Potencia de salida Canal de subwoofer "sinusoidal" 175 W
  • Descripción Ítem
    Frecuencia de corte inferior (-3 dB). 25 Hz
    Apropiado para receptor AV si
    Apto para clavija banana si
    Diámetro máximo del cable. 4 mm
    Tapa frontal desmontable si
    Blindaje electrostático si
    Tweeters (número por altavoz) 1
    Tweeter (diámetro) 25 mm
    Tweeter (material) Tejido
    Medio grave (número por altavoz) 2
    Medio grave (diámetro) 130 mm
    Transductor de graves-medios (material) Fibra de vidrio
    Woofers (número por altavoz) 1
    Woofer (diámetro) 250 mm
    Potencia continua en vatios (IEC - Larga duración) 130 W
    Rango de frecuencia de/a 34 - 22000 Hz
    Respuesta de impulso (Ruido IEC de corta duración) 180 W
    Nivel máximo de presión sonora 103 dB/1m
    Impedancia nominal 4 - 8 Ohm
    Frecuencia de corte al woofer (recomendada). 90 Hz
    Principio de acústica Sistema de 2 vías
    Diseño de la carcasa cerrada
  • Descripción Ítem
    Bornes de conexión Terminales de tornillo
    Potencia mínima recomendada del amplificador 20 W

Reseñas

Componentes incluidos

M 420 F Stereo Set
  • 1 × Hybrid-Lautsprecher M 420 F (Links) – Haya
  • 1 × Hybrid-Lautsprecher M 420 F (Rechts) – Haya